Installation And Connections; Setting Up The Screen And The Projector - Sanyo PDG-DXT10KL User Manual

2. Installation and Connections

Setting Up the Screen and the Projector

This section briefly describes how to set up your projector and how to connect video and
audio sources.
Your projector is simple to set up and use. But before you get started, you must first:
Set up a screen and the projector.
Connect your computer or video equipment to the projector. See
Connect the supplied power cable. See
Note:
Ensure that the power cable and any other cables are disconnected before moving the projector. When
moving the projector or when it is not in use, cover the lens with the lens cap.
Connecting the Supplied Power Cable on page 31.
17
Making Connections on page 26.