Audio Control; Accessing Audio Menu; Selecting Audio Options - Sanyo AVP-429 Instruction Manual

Audio Control

Accessing Audio Menu

1.
Press MENU.................
2. Audio
Highlight [ ].........
Use or button.
3.
Press OK ..... . .......... ....
To highlight an option and to change settings, press ??? ?. Press OK to confirm the selection or alter the settings.
Press EXIT to exit.
Selecting Audio
Options
To quickly change the audio mode,
press the AUDIO button
repeatedly.
For analog channels, you may use
the MTS/SAP button to cycle
through the Multi-channel TV
Sound options.
For digital channels, you may use
the MTS/SAP button to quickly
select audio track if available.
..
Option
Bass, Treble &
Balance
Phone Settings
Effects
Auto Volume Control
COAX Out (SPDIF)
Analog Preference
Digital Preference
TV Speaker
RESET AUDIO
Adjusting MENU Options
Picture Bass, Treble & Balance
Phone Settings
Audio
Effects
Auto Volume Control
Settings
COAX Out (SPDIF)
Analog Preference
Channels
Digital Preference
TV Speaker
Locks
RESET AUDIO
Guide
Description
Select to access an audio adjustment window.
Bass Adjust to increase or decrease lower-pitched sounds.
Treble
Adjust to increase or decrease higher-pitched sounds.
Balance Adjust to emphasize left or right speaker balance.
Select to access a phone settings window. All adjustments in
this window have an effect on the headphone only.
Volume
Adjust to increase or decrease phone volume.
Bass Adjust to increase or decrease lower-pitched sounds.
Treble Adjust to increase or decrease higher-pitched sounds.
Balance
Adjust to emphasize left or right speaker balance.
None Select to turn off the sound effect.
Hall Select for a concert program.
Theater Select for a movie program.
Music Select for a music program.
Speech
Select for a spoken dialog program.
ON Select to equalize overall volume levels across all channels.
OFF Select to turn off Auto Volume Control.
Select to output audio signal as its original format.
AUTO
Select to output audio signal by PCM form.
PCM
Use this item to select a stereo mode as a default mode when
you switch your TV to a analog program. Select from
[Mono], [Stereo] and [SAP].
Mono Select for mono reception. Use to reduce noise during weak
stereo broadcasts.
Select for stereo reception when viewing a program
Stereo
broadcast in stereo.
Select to automatically switch the TV to second audio
SAP
programs when a signal is received. If no SAP signal is
present, the TV remains in Stereo mode.
Use this item to select a language as a default language when
you switch your TV to a digital program.
Select to turn the TV speakers ON or OFF.
Select to reset audio settings to the defaults.
OFF
ON
29