Sanyo DP50747 Service Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Plasma TV
  5. DP50747
  6. Service manual

Sanyo DP50747 Service Manual

Remote control plasma color television
Hide thumbs Also See for DP50747:
Table of Contents

Advertisement

Quick Links

DP50747-03 / 04 / 05
Panel: Self Test
Panel is capable of generating internal patterns without the
Main Signal Board attached. (rotating: white / red / green /
blue / and various other patterns)
This test eliminates Main Signal Board from circuit and
confirms if panel itself is operating properly.
1) Unplug these connectors from SMPS & Logic Board.
CN8004 (SMPS)
CN8003 (SMPS)
CN2013 (Logic Bd.)
2) Short pins 1-4 together on Logic Bd. at CN2007.
(a small screw works good to short all together)
3) Shorting pins Gnd & PS_ON at CN8003, (3rd & 4th pin
from top of connector) will energize the panel, after AC
power has been applied in step #4 below.
(IF AC power is applied and panel is working, it will energize with
rotating patterns just as soon as pins Gnd & PS_ON are shorted)
4) AC power must be applied to panel. Power cord can still
be attached to AC Filter, or power can be applied
directly to CN8001 on SMPS.
(recommend that AC Filter still be used for ease of
connection, but can be by passed if needed)
5) Please remember to remove short at CN2007, when
finished.
note: no audio is available with panel self test

Advertisement

Table of Contents
loading

Related Manuals for Sanyo DP50747

Summary of Contents for Sanyo DP50747

  • Page 1 DP50747-03 / 04 / 05 Panel: Self Test Panel is capable of generating internal patterns without the Main Signal Board attached. (rotating: white / red / green / blue / and various other patterns) This test eliminates Main Signal Board from circuit and confirms if panel itself is operating properly.

  • Page 3: Table Of Contents

    SCHEMATIC DIAGRAMS ..... 59-60 DEPTH INCLUDING BASE ....281mm DP50747, J4DJ, PRODUCT CODE 111010304 REFERENCE No.

  • Page 4: Safety Instructions

    SAFETY INSTRUCTIONS SAFETY PRECAUTIONS READING SHOULD NOT EXCEED 750 mV. AC VOLTMETER WARNING: The chassis of this receiver has a floating (5000 ohms per volt or more sensitivity) ground with the potential of one half the AC line voltage in respect to earth ground.

  • Page 5: Service Adjustments

    SERVICE ADJUSTMENTS GENERAL This set has an On-screen Service Menu system included in Volume – the CPU that allows remote operation for most of the ser- Enter Service Menu vice adjustments. ON-SCREEN SERVICE MENU SYSTEM 1. Enter the Service Menu: •...

  • Page 6: On-Screen Service Menu

    ON-SCREEN SERVICE MENU Table 1. ON-SCREEN SERVICE MENU When IC802 (EEPROM) is replaced, check the bus data to confirm they are the same as below. See page 3 for On-Screen Service Menu access and adjustments. Title Initial Data Note Volume setup inspection Option 1 Data Option 2 Data 1R00...

  • Page 7: Power Failure Circuit

    POWER FAILURE CIRCUIT Check the following if the unit is turned off by the power This unit is equipped with a Power Failure Detector function failure detector. included in the CPU which checks for an abnormal condi- tion in the chassis power supplies. 1.

  • Page 8: Mechanical Disassembly

    MECHANICAL DISASSEMBLY ATTENTION ■ This PDP TV uses several different kinds of screws. Using the correct screw is required to prevent damage. ■ The gasket is provided to prevent interference to other radio and television receivers. The gasket must be returned to its previous position after servicing. ■...
  • Page 9 BOARD AND SPEAKER LOCATIONS 1: Main Board 3: Control Board 2: Sub-Power and Filter Board 4: Speakers TERMINAL BASE REMOVAL Remove 5 screws (F:4X14, 2pcs, G:3X8, 3pcs) to take the terminal base off. G G G — 7 —...
  • Page 10 MECHANICAL DISASSEMBLY (CONT.) BOARD REMOVAL 1: Main Board Removal 3: Control Board Removal Remove 5 screws (H:3X6) to take the main board Remove 2 screws (A:4X14) to take the control off. board off. 2: Sub-Power and Filter Board Removal Remove 12 screws (H:3X6, 9pcs, I:3X8, 2pcs, J:4X10, 1pc) to take the sub-power and filter board off.
  • Page 11 FILTER GLASS AND SPEAKER REMOVAL (Cont.) 3. Remove 13 screws (4X14) to take the shield plates (top, bot- tom, R/L sides) with the filter glass off. 4. Remove 4 screws (4X!4) to take off each speaker — 9 —...
  • Page 12 MECHANICAL DISASSEMBLY (CONT.) PANEL MODULE REMOVAL 1. Disconnect the following socket connections; PDP Module Power Unit ~ Main Board: CN8003, CN8004 PDP Module Power Unit ~ Sub-power and Filter Board: CN8001 PDP Module Logic Unit ~ Main Board: K5LV 2. Remove 8 screws (4X14) from the Mounting Brackets and take the panel module off.

  • Page 13: Chassis Electrical Parts List

    CHASSIS ELECTRICAL PARTS LIST CAUTION: To Protect against electrical shock and for continued product safety, refer to SAFETY PRECAUTIONS, and PRODUCT SAFETY NOTICE on Page 2. PRODUCT SAFETY NOTICE PRODUCT SAFETY SHOULD BE CONSIDERED WHEN A REPLACEMENT IS MADE IN ANY AREA OF A RECEIVER. COMPONENTS INDICATED BY A IN THIS PARTS LIST AND THE SCHEMATIC DIAGRAM DESIGNATE COMPONENTS IN WHICH SAFETY CAN BE OF SPECIAL SIGNIFICANCE.
  • Page 14 Schematic Schematic Part No. Part No. Description Description Location Location CAPACITORS CEXLB1H2R2WAJ ELECT 2.2U M C842 CK1H104ZLZFNG CERAMIC 0.1U Z C001 CPXLB1C100YAJ NP-ELECT 10U M C1000 CK1H104ZLZFNG CERAMIC 0.1U Z CPXLB1C100ZAJ NP-ELECT 10U M C1001 CEXLB1H100VDJ ELECT 10U M C002 CK1H104ZLZFNG CERAMIC 0.1U Z...
  • Page 15 Schematic Schematic Part No. Part No. Description Description Location Location CEXLB0J102WAJ ELECT 1000U M C5513 CK1H104ZLZFNG CERAMIC 0.1U Z C1634 CK1A105ZLZFNG CERAMIC 1P Z C5515 CC1H470JLZCNG CERAMIC 47P J C1640 CEXLB1C101VDJ ELECT 100U M C5516 CC1H470JLZCNG CERAMIC 47P J CEXLB1C101WAJ ELECT 100U M C5517...
  • Page 16 Schematic Schematic Part No. Part No. Description Description Location Location C5576 CK1H104ZLZFNG CERAMIC 0.1U Z C6100 CC1H180JLZCNG CERAMIC 18P J C5580 CK1H104ZLZFNG CERAMIC 0.1U Z C6101 CK1H104ZLZFNG CERAMIC 0.1U Z C5581 CK1H104ZLZFNG CERAMIC 0.1U Z C6102 CC1H180JLZCNG CERAMIC 18P J C5582 CK0J106KGMBNG CERAMIC...
  • Page 17 Schematic Schematic Part No. Part No. Description Description Location Location C6212 CK1H104ZLZFNG CERAMIC 0.1U Z C6276 CK1H104ZLZFNG CERAMIC 0.1U Z C6213 CK1H473KLZBNG CERAMIC 0.047U K C6277 CEXLB1H100VDJ ELECT 10U M C6214 CK1H473KLZBNG CERAMIC 0.047U K CEXLB1H100WAJ ELECT 10U M C6215 CK1H103ZLZFNG CERAMIC 0.01U Z...
  • Page 18 Schematic Schematic Part No. Part No. Description Description Location Location DIODES IC6502 QXXAVC848---J IC TMDS341APFCR IC6551 QXXAVC854---P IC TC74VHC153FT(EL) D801 DD1SS352----G DIODE 1SS352-(TPH3) IC6590 QTC7SET08FU-P IC TC7SET08FU DD1SS355----G DIODE 1SS355-TE-17 IC6591 QTC7SET08FU-P IC TC7SET08FU D802 DZUDZS6.2B--G ZD UDZS-TE-176.2B IC6592 QTC7SET08FU-P IC TC7SET08FU D1600 DDD1FM3-----G...
  • Page 19 Schematic Schematic Part No. Part No. Description Description Location Location L1701 RGFR000ZTAANL MT-GLAZE 0.000 ZA1/10W L5802 1AV4L2GA150JG INDUCTOR,15U J L1702 RGFR000ZTAANL MT-GLAZE 0.000 ZA1/10W L6050 1LB4L26B0740G INDUCTOR , 220 OHM L1703 RGFR000ZTAANL MT-GLAZE 0.000 ZA1/10W L6051 RGFR000ZTAANL MT-GLAZE 0.000 ZA1/10W L1704 RGFR000ZTAANL MT-GLAZE 0.000 ZA1/10W...
  • Page 20 Schematic Schematic Part No. Part No. Description Description Location Location L6214 RGFR000ZTAANL MT-GLAZE 0.000 ZA1/10W T2SC3928A1S-P TR 2SC3928A1S L6215 RGFR000ZTAANL MT-GLAZE 0.000 ZA1/10W Q803 TXXLBB006---P TR MMBTSC3928R L6216 RGFR000ZTAANL MT-GLAZE 0.000 ZA1/10W T2SC2412K-R-P TR 2SC2412K T146 R L6217 RGFR000ZTAANL MT-GLAZE 0.000 ZA1/10W T2SC2412K-S-P TR 2SC2412K T146 S L6220...
  • Page 21 Schematic Schematic Part No. Part No. Description Description Location Location T2SC3928A1R-P TR 2SC3928A1R T2SA1235A1E-P TR 2SA1235A1E T2SC3928A1S-P TR 2SC3928A1S T2SA1235A1F-P TR 2SA1235A1F Q1202 TXXLBB006---P TR MMBTSC3928R TISA1235AC1EP TR ISA1235AC1E T2SC2412K-R-P TR 2SC2412K T146 R TISA1235AC1FP TR ISA1235AC1F T2SC2412K-S-P TR 2SC2412K T146 S Q1605 TXXLBB006---P TR MMBTSC3928R...
  • Page 22 Schematic Schematic Part No. Part No. Description Description Location Location T2SC2412K-S-P TR 2SC2412K T146 S T2SC2412K-S-P TR 2SC2412K T146 S T2SC2812-L6-P TR 2SC2812-L6-TB T2SC2812-L6-P TR 2SC2812-L6-TB T2SC2812-L7-P TR 2SC2812-L7-TB T2SC2812-L7-P TR 2SC2812-L7-TB T2SC2812N-L6P TR 2SC2812N-L6-TB0 T2SC2812N-L6P TR 2SC2812N-L6-TB0 T2SC3928A1R-P TR 2SC3928A1R T2SC3928A1R-P TR 2SC3928A1R T2SC3928A1S-P...
  • Page 23 Schematic Schematic Part No. Part No. Description Description Location Location R812 RGF1000JTCANL MT-GLAZE 100 JA 1/10W R895 RGF4703JTCANL MT-GLAZE 470K JA 1/10W R814 RGFR000ZTCANL MT-GLAZE 0.000 ZA 1/10W R1000 RGF47R0JTCANL MT-GLAZE 47 JA 1/10W R815 RGF1000JTCANL MT-GLAZE 100 JA 1/10W R1001 RGF75R0JTCANL MT-GLAZE...
  • Page 24 Schematic Schematic Part No. Part No. Description Description Location Location R1200 RGF1001JTCANL MT-GLAZE 1K JA 1/10W R1800 RGF1000JTCANL MT-GLAZE 100 JA 1/10W R1201 RGF47R0JTCANL MT-GLAZE 47 JA 1/10W R1802 RGF1000JTCANL MT-GLAZE 100 JA 1/10W R1202 RGF1002JTCANL MT-GLAZE 10K JA 1/10W R1803 RGF1000JTCANL MT-GLAZE...
  • Page 25 Schematic Schematic Part No. Part No. Description Description Location Location R5520 RGFR000ZTCANL MT-GLAZE 0.000 ZA 1/10W R5807 RGF6800JTCANL MT-GLAZE 680 JA 1/10W R5521 RGF47R0JTCANL MT-GLAZE 47 JA 1/10W R5808 RGF47R0JTCANL MT-GLAZE 47 JA 1/10W R5523 RGF4701JTCANL MT-GLAZE 4.7K JA 1/10W R5809 RGF47R0JTCANL MT-GLAZE...
  • Page 26 Schematic Schematic Part No. Part No. Description Description Location Location R6174 RGF4702JTCANL MT-GLAZE 47K JA 1/10W R6305 RGF4701FTCANL MT-GLAZE 4.7K FA 1/10W R6176 RGF1002JTCANL MT-GLAZE 10K JA 1/10W R6306 RGF4701FTCANL MT-GLAZE 4.7K FA 1/10W R6200 RGF3302JTCANL MT-GLAZE 33K JA 1/10W R6309 RGF1502FTCANL MT-GLAZE...
  • Page 27 Schematic Schematic Part No. Part No. Description Description Location Location R6551 RGF4702JTCANL MT-GLAZE 47K JA 1/10W SWITCHES R6552 RGF1000JTCANL MT-GLAZE 100 JA 1/10W SW1901 1AV4S10B5650J SWITCH, PUSH R6553 RGF1001JTCANL MT-GLAZE 1K JA 1/10W 1AV4S10B0900J SWITCH, PUSH R6554 RGF1001JTCANL MT-GLAZE 1K JA 1/10W SW1902 1AV4S10B5650J SWITCH, PUSH...

  • Page 28: Cabinet Parts List

    ACCESSORY PARTS LIST KEY NO. PARTS NO. DESCRIPTION KEY NO. PARTS NO. DESCRIPTION 1AA2CAM0589A- 50 CABINET FRONT 1JC6P1P0257B- OWNERS MANUAL DP50747 A1AV4Z12B51800 OPTICAL FILTER PDP 1AV0U10B43105 ASSY, REMOCON GXBJ 1AA2CBF0025-- 50W CABINET BACK 1JC4D2BT0001- BATTERY ENELOOP AAA 1AA2DES0916-F DEC SHEET AV...

  • Page 29: Component And Testpoint Locations

    COMPONENT AND TESTPOINT LOCATIONS MAIN BOARD PARTS SIDE R866 R1629 K_DL K1000 K_DEBUG R842 R1633 R843 R892 R1635 D9100 R844 R9107 R864 K9100 R1684 L2014 C701 R865 C683 C825 R1637 R1648 R1688 R863 L1605 IC001 R858 R1681 IC001A RB6355 R872 R1634 IC001B R6264...
  • Page 30 MAIN BOARD FOIL SIDE L1723 L1722 SC1508 K9100 L2017 L1721 R1515 R017 R9108 L2016 R1517 C011 K_DL IC001 L1713 R1518 C842 R1805 R9105 K_DEBUG C694 IC001A C002 R1516 SC1805 IC001B R9101 L1716 SC1509 K1000 IC001C L6704 R1807 R9106 IC001D SC1806 C689 C010 R1803...
  • Page 31 COMPONENT AND TESTPOINT LOCATIONS (Cont.) KEY BOARD PARTS SIDE SW1902 SW1905 SW1903 SW1904 L1901 SW1901 A1901 C1902 C1903 K19FRA D1901 A30C5 PWB,CONTROL,N4SG A1902 CH_UP 1AA4B10N2020A POWER VOL_UP VOL_DOWN CH_DOWN D1902 KEY BOARD FOIL SIDE SW1905 SW1904 SW1903 SW1902 L1901 K19FRA R1907 SW1901 D1901...

  • Page 32: Block Diagram Power Lines

    BLOCK DIAGRAM POWER LINES DP50747 (50-J4DJ) Sub Power &Filter Power Failure Control Board Board Main Board Normal -> "H" K601 Failure -> "L" A1902 5V_STBY On -> "H" Q803/804 P-FAIL POWER_ON Pre-AMP IC801 Fuse F601 Varistor VA601 IC802 LF601,LF602 EEPROM...

  • Page 33: Block Diagram Signal Lines

    BLOCK DIAGRAM SIGNAL LINES DP50747 (50-J4DJ) R/G/B AV1_C_SW (LVDS) AV1_C PDP PANEL AV1_Y IC1201 VFE_CIN IC5500 S Video Q1200 Q5803,Q5804 AV1_V VFE_YIN Video SW Composite Video SWD_CVBS Screen HDMI_SW1 A_5V VFE_CVBS Q101 Q1201 Q5801,Q5802 IC6551 Audio Controller HDMI_SW2 B_5V TV_V...

  • Page 34: Ic Block Diagrams

    IC BLOCK DIAGRAMS IC001, Audio AMP Standby Input amplifier + OUT1 IN 1 Output amplifier - OUT1 MUTE Vcc ground shorting protection circuit Load shorting protection circuit Thermal protection circuit + OUT2 IN 2 Output amplifier - OUT2 Input amplifier Ripple Filter IC1201, IC1251 Video and Audio Select...
  • Page 35 IC BLOCK DIAGRAMS (CONT.) IC1600, DC to DC Converter IC1620, DC to DC Converter — 33 —...
  • Page 36 IC1630, DC to DC Converter IC1640, DC to DC Converter — 34 —...
  • Page 37 IC BLOCK DIAGRAMS (CONT.) IC5500 Screen Controller — 35 —...
  • Page 38 IC5700, IC5720 DDR: Double Data Rate SDRAM — 36 —...
  • Page 39 IC BLOCK DIAGRAMS (CONT.) IC6100, TS Demodulator — 37 —...
  • Page 40 IC6200, A/D Converter — 38 —...
  • Page 41 IC BLOCK DIAGRAMS (Cont.) IC6502, DVI / HDMI SWITCH (3.3V) VSADJ TMDS Drive 3~to~1 MUX TMDS Drive TMDS Drive (3.3V) TMDS Drive HPD1 HPD2 Control Logic HPD_SINK HPD3 SCL1 SCL_SINK SDA1 SDA_SINK SCL2 SDA2 SCL3 SDA3 — 39 —...
  • Page 42 IC6551, HDMI MULTIPLEXER Same as above block — 40 —...
  • Page 43 IC BLOCK DIAGRAMS (CONT.) IC6270, STEREO A/D CONVERTER AVDD CONTROL INTERFACE AGND SDATO LRCLK DIGITAL AUDIO FILTERS INTERFACE BCLK MCLK — 41 —...

  • Page 44: Troubleshooting Flow Charts

    TROUBLESHOOTING FLOW CHARTS NO POWER fuse (F601) Check: open? Varistor (VA601),Sub Power & Filter Unit the voltage Check: Power Unit to "5V_STBY" line (PDP Module) supplied? All 0V (except '5V_STBY' line) the voltage to all lines Check: around supplied? CPU (IC801), IC (IC802), Crystal (X801), Power Unit (or the voltage to some lines is not supplied.) After a few seconds, the set will be switched off.
  • Page 45 TROUBLESHOOTING FLOW CHARTS (Cont.) NO AUDIO Is there Check: All Modes ? signal at speaker Speaker (L / R) terminal ? Is there Check: signal at IC001 2pin (L) Line: IC001 6pin - IC801 (CPU) 38pin (Mute) or 4pin (R) ? Parts: Around IC001 (Audio AMP.) Check: Parts: Around IC3200 (Audio Control)
  • Page 46 NO VIDEO Check: RF (TV) only All Inputs? Line: A6100 4pin - Q101 - IC1201 2pin Parts: Around A6100 (TU_IF), Q101 AV1 only Check: Line: IC1201 1pin (Composite Video: CV) IC1201 5pin (S-Input: Y) IC1201 13pin - IC5500 Y3 (AV1: C) Check: AV2 only Line:...

  • Page 47: Control Port Functions

    CONTROL PORT FUNCTIONS System Control (CPU : IC801) Pin Name Function I/O Description CVin Reserve GND (0Vdc) P70/INT0/TOLCP LINE OFF Detect AC Voltage Reduction (Normal: High) P71/INT1/TOHCP Reserve (Open) P72/INT2/TOIN Display Enable (Unused) P73/INT3/TOIN RC in RC Input Key in Key Input AFT S-Figure in AFT S-Figure Input...
  • Page 48 CONTROL PORT FUNCTIONS (Cont.) System Control (CPU : IC801 Cont.) Pin Name Function I/O Description P12/SCK0 PDP/LCD Option Setting (PDP: High, LCD: Low) Panel Size 3 Panel size Panel Size 2 Panel size Panel Size 1 Panel size Panel Size 0 Panel size Reserve (Open)

  • Page 49: Signal Flow Charts

    SIGNAL FLOW CHARTS WHEN A DIGITAL-RF CHANNEL IS SELECTED DDR2 DDR2 SPI Flash 256Mbit 256Mbit (32 Mbit) (400MHz) (400MHz) Video 2 (Component) Video 3 (Component) MPEG2 DEMUX RS-232C Video Decode HDMI1 (or DVI) Clock (24.576MHz) I²C Audio Video RESET HDMI2 I²C Scaler HDMI3...
  • Page 50 WHEN AN ANALOG-RF CHANNEL IS SELECTED DDR2 DDR2 SPI Flash 256Mbit 256Mbit (32 Mbit) (400MHz) (400MHz) Video 2 (Component) Video 3 (Component) MPEG2 DEMUX RS-232C Video Decode HDMI1 (or DVI) Clock (24.576MHz) I²C RESET HDMI2 I²C Scaler HDMI3 Video I²C S/P DIF RF-IN 8VSB...
  • Page 51 SIGNAL FLOW CHARTS (CONT.) WHEN A VIDEO INPUT (VIDEO1) IS SELECTED DDR2 DDR2 SPI Flash 256Mbit 256Mbit (32 Mbit) (400MHz) (400MHz) Video 2 (Component) Video 3 (Component) MPEG2 DEMUX RS-232C Video HDMI1 (or DVI) Decode Clock (24.576MHz) I²C HDMI2 RESET I²C Scaler HDMI3...
  • Page 52 WHEN VIDEO 2 IS SELECTED DDR2 DDR2 SPI Flash 256Mbit 256Mbit (32 Mbit) (400MHz) (400MHz) Video Video 2 (Component) Video 3 (Component) MPEG2 DEMUX RS-232C Video HDMI1 (or DVI) Decode Clock (24.576MHz) I²C HDMI2 RESET Video I²C Scaler HDMI3 I²C S/P DIF RF-IN Audio...
  • Page 53 SIGNAL FLOW CHARTS (CONT.) WHEN VIDEO 3 IS SELECTED DDR2 DDR2 SPI Flash 256Mbit 256Mbit (32 Mbit) (400MHz) (400MHz) Video 2 (Component) Video 3 (Component) MPEG2 Video DEMUX RS-232C Video Decode HDMI1 (or DVI) Clock (24.576MHz) I²C RESET Video HDMI2 I²C Scaler HDMI3...
  • Page 54 WHEN HDMI-3 IS SELECTED DDR2 DDR2 SPI Flash 256Mbit 256Mbit (32 Mbit) (400MHz) (400MHz) Video 2 (Component) Video 3 (Component) MPEG2 HDMI RS-232C Video HDMI1 (or DVI) Decode Clock (24.576MHz) I²C Video HDMI2 RESET I²C Audio Scaler HDMI3 I²C S/P DIF RF-IN Audio NTSC...
  • Page 55 SIGNAL FLOW CHARTS (CONT.) WHEN HDMI-2 IS SELECTED DDR2 DDR2 SPI Flash 256Mbit 256Mbit (32 Mbit) (400MHz) (400MHz) Video 2 (Component) Video 3 (Component) MPEG2 HDMI Video RS-232C Decode HDMI1 (or DVI) Clock (24.576MHz) I²C Video RESET HDMI2 I²C Audio Scaler HDMI3 I²C...
  • Page 56 WHEN HDMI-1 IS SELECTED (DVI) DDR2 DDR2 SPI Flash 256Mbit 256Mbit (32 Mbit) (400MHz) (400MHz) Video 2 (Component) Video 3 (Component) MPEG2 HDMI RS-232C Video HDMI1 (or DVI) Decode I²C Clock (24.576MHz) Video HDMI2 RESET I²C Scaler HDMI3 I²C S/P DIF RF-IN Audio NTSC...

  • Page 57: Schematic Notes

    SCHEMATIC NOTES NOTES ON SCHEMATIC DIAGRAMS 1. All resistance values in ohms K=1,000 M=1,000,000. 2. Resistors specified with resistance value are “1/6DJ. ” 3. Resistors specified with type of resistor, tolerence and resistance value are “1/4. ” 4. Unless otherwise noted on schematic, all capacitor values less than 1 are expressed in µF (Micro Farad), and the values more than 1 are in pF .

  • Page 58: Ic, Diode, And Transistor Pin Layouts

    IC, DIODE, AND TRANSISTOR PIN LAYOUTS INTEGRATED CIRCUITS PHOTO COUPLERS DIODES TRANSISTORS TOP VIEW TOP VIEW MARK COUNT TERMINALS IN ARROW DIRECTION SIDE VIEW INFRARED EMITTING B ... BASE C ... COLLECTOR A..ANODE E ... EMITTER K..CATHODE CHIP TRANSISTORS CHIP RESISTORS TOP VIEW TOP VIEW 12 x 10 = 12K ohm...

  • Page 59: Pc Board Connections And Locations

    PLASMA DISPLAY PANEL POWER SUPPLY CN8004 LOGIC BOARD CN8003 CN2001 CN8001 K8FRA K5LV SPEAKER FILTER BOARD MAIN UNIT ASSY,PWB,CONTROL 5V_STBY KEY_IN RC_IN LED_ON 1AV4W11B29300...

  • Page 60: Capacitor And Resistor Code Chart

    Y ......Wire Wound C ......Solid D ......Carbon Film W ......Wire Wound For parts or service contact Sanyo Manfacturing Corporation P .O. Box 2000 3333 Sanyo Road Forrest City, Arkansas 72335-2000 May 2008 SMC Published in U.S.A.
  • Page 61 MODEL DP50747 Chassis No. P50747-03 SCHEMATIC DIAGRAMS TO SPEAKER ELECTROSTATICALLY SENSATIVE DEVICES (1.8V_DIGITAL,3A) J10EA043N Many solid-state devices (especially Integrated Circuits) are Electrostatically D5V 0.84A Sensitive, and, therefore, require special handling techniques as described under D3.3VP “Servicing Electrostatically Sensitive Devices, ” on page two in this service literature.

  • Page 62: Schematic Diagrams

    MODEL DP50747 Chassis No. P50747-03 SCHEMATIC DIAGRAMS ELECTROSTATICALLY SENSATIVE DEVICES Many solid-state devices (especially Integrated Circuits) are Electrostatically Sensitive, and, therefore, require special handling techniques as described under “Servicing Electrostatically Sensitive Devices, ” on page two in this service literature.

Table of Contents