Specifying The Channel (Camera Number); Performing Operations In Play Mode - Sanyo DSR - 300 Instruction Manual

2 WATCHING IMAGES
(when optional interface board is installed)
Specifying the channel (camera
number)
When using multiple cameras and a multiplexer that can
decode channel information (camera Nos.), you can
specify the channel No. of the monitoring camera for
monitor display.
Select the channel.
Specify a channel to be viewed. The image from the
specified channel will be displayed.
In addition, the corresponding channel number will be
displayed in the "CHANNEL" box.
Channel
Playback
selection
Click the
Adjusting the playback speed
During playback, click the
button.
The playback speed will increase or decrease by one level
accordingly.
Reverse playback
Click the
Adjusting the reverse playback speed
During reverse playback, click the
The reverse playback speed will increase or decrease by
one level accordingly.
Still image
During playback, click the
Playback will be paused on the current image.
To return to normal play mode, click the
playback is paused.
Frame advance (forward/reverse)
While playback is paused, click the
The paused image will frame advance (forward/reverse)
accordingly.
Alarm skip
During playback, click the
button.
The previous or next alarm image is displayed accordingly.
114

Performing operations in play mode

button.
button.
button.
button.
or
or
button.
button while
or
or
English