Advertisement
26. Install the assembled left headlight cover in the
reverse order of removal.
27. Repeat Steps 23 through 26 on the right side.
28. Install the LED headlight sub harness as shown.
TAPE (Red)
LED HEADLIGHT
SUB HARNESS
SCREW
(Reuse)
ASSEMBLED LEFT
HEADLIGHT COVER
FRONT FENDER
(Reuse)
TAPE (Black)
FRONT FENDER
29. Install the clip and connector as shown.
• Repeat on the right side.
30. Install the caps and front fender in the reverse order
of removal.
• Remove the covered shop towel or similar.
31. Install the vehicle's parts in the reverse order of
removal.
• Confirm that any wire harness is not caught or
too tight.
32. Connect the negative (-) cable to the battery and
check each light for function.
33. Che c k the LED headlight aim and ad just if
necessary.
7 of 7
FRONT FENDER
3-PIN WATERPROOF
CONNECTOR (Black)
LED HEADLIGHT
SUB HARNESS
CLIP
Advertisement
