Cisco Interactive Experience Client 4600 Series User Manual page 263

Appendix I HD Video Conferencing Between Two IECs Using the Video Encoder Card
Figure I-2
Configure Call Information
To configure HD video conferencing, you will need CUCM version 9.1.1.10000-5 and the SipPhone
widget.
This set up is not compatible with Cisco Contact Center Express.
Note
To configure call information:
Configure both IECs on the CUCM. See the "Cisco IEC Set Up on the CUCM" section of Appendix F
Step 1
for instructions.
Configure the call information either using a policy or the SipPhone widget. See either the "Using a
Step 2
Policy on the IEM" or the "Using the SipPhone Widget" section of Appendix F.
MIC-in Port on the IEC
Set Up Video Calls Between Two IECs with VECs
Cisco Interactive Experience Client 4600 Series User Guide
I-3