Binary Input Objects; Binary Value Objects - GE PanaFlow MV80 User Manual

4.3.4c

Binary Input Objects

The MV 80 and MV82 Vortex Mass Flow Meters Binary Input type objects are described in Table 20 below.
Object
Instance
1
2
3
4
Note: Binary Input 4, Present value always read zero because no information is available from the client. So, the
polarity property has no impact on the Present value property when the Out of service property is false.
4.3.4d

Binary Value Objects

The MV 80 and MV82 Vortex Mass Flow Meters Binary Value type objects are described in Table 21 below.
Object Instance
PanaFlow™ MV80 & MV82 User's Manual
Table 20: Binary Input Object Types
Object
Name
Alarm1 The status of the three alarms may be monitored via the
Modbus command. The value returned indicates the state
Alarm2
of the alarm, and will be 1 only if the alarm is enabled and
Alarm3
active. A zero value is transmitted for alarms that are
either disabled or inactive
External TBD
Table 21: Binary Value Object Types
Object Name
1
Description
Description
Reset Reset's Totalizer
Chapter 4. Serial Communications
101