Removing The Fixing Film Unit - Canon MF8580Cdw Service Manual

4
Disassembly/Assembly > Fixing System > Removing the Fixing Film Unit > Procedure

Removing the Fixing Film Unit

■ Preparation
1) Removing the Right Cover. Refer to page 4-20.
2) Removing the Left Cover. Refer to page 4-17.
3) Removing the Rear Upper Cover. Refer to page 4-24.
4) Removing the Rear Cover. Refer to page 4-24.
5) Removing the Rear Lower Cover. Refer to page 4-25.
6) Removing the Rear Cover Rib Unit. Refer to page 4-27.
7) Removing the Duplex Printing Reverse Drive Unit. Refer to page 4-85.
8) Removing the Fixing Assembly. Refer to page 4-104.
■ Procedure
1) Remove the 2 Pressure Springs [1] on the right and left and the 2 Pressure Plates [2].
• 4 Hooks [3]
• 4 Bosses [4]
• 2 Protrusions [5]
[5] [4] [3]
[2]
[3] [1]
4 Disassembly/Assembly > Fixing System > Removing the Fixing Film Unit > Procedure
[3] [4]
[5]
[4]
[2]
[1] [3]
F-4-229
2) Remove the gear [1], 2 Parallel Pins [2], E-Ring [3], cam [4], and bushing [5].
• 1 Claws [6]
[4]
[3]
[1]
[2]
[6]
CAUTION:
At installation, be sure to match the direction of the cam [4] with that of the cam [6] on
the other side of the Fixing Assembly.
[4]
[5]
[2]
F-4-230
[6]
F-4-231
4-106
4-106