Removing The Adf Separation Roller - Canon MF8580Cdw Service Manual

4
Disassembly/Assembly > Document Exposure, Feed System > Removing the ADF Separation Roller > Procedure

Removing the ADF Separation Roller

■ Preparation
1) Remove the ADF Roller Unit. Refer to page 4-38.
■ Procedure
CAUTION:
Do not touch the surface of the roller.
1) Remove the bushing [1] and the 2 plastic E-rings [2].
[1]
2) Slide the Roller Shaft [1] to remove the parallel pin [2] and the bushing [3].
CAUTION:
Be careful not to lose the parallel pin [2] at assembly/disassembly.
[1]
4 Disassembly/Assembly > Document Exposure, Feed System > Removing the ADF Separation Roller > Procedure
[2]
F-4-71
[2]
F-4-72
3) Turn the Roller Shaft [1] in the direction of the arrow and fit the projection [2] to the hole of
the Roller Holder to remove.
4) Remove the ADF Separation Roller [1].
4-41
[1]
[2]
F-4-73
[1]
F-4-74
4-41