Making A Buttonhole On Stretch Fabrics - AEG 30Z Instruction Manual

Instruction manual for Model AEG 30Z /AEG 35Z
Buttonhole stitch
Cut the center of the buttonhole being
careful not to cut any stitches on either side.
Use a pin on the buttonhole so you do not
cut too many stitches.
Please Note:
When cutting the buttonhole with the
seam ripper, do not place your hands in the
cutting direction, otherwise injuries may
result.
Making a buttonhole on
stretch fabrics
When sewing buttonholes on stretch
fabric, hook heavy thread or cord under
the buttonhole foot.
Attach the buttonhole foot and hook the
gimp thread onto the back of the presser
foot.
Bring the two gimp thread ends to the
front of the foot and insert them into the
grooves, then tie them there temporarily.
Lower the presser foot and start sewing.
Set the stitch width to match the diameter
of the gimp thread.
Once sewing is completed, pull the gimp
thread gently to remove any slack, then
trim off any excess.
Please Note:
It is suggested that you use interfacing on
the backside of the fabric.
38