Buttonhole Sewing / One Step Button Hole Sewing - AEG 112704 Instruction Book

ONE STEP BUTTON HOLE SEWING
Your machine works with a buttonhole automatic. Together with the button hole foot you can sew button holes size up to 3 cm.
Please try this function with an original piece of cloth. With very thin fabric put a piece of vlies under the cloth, so you can prevent
pulling of fabric.
Put your button in the opening
•
of the foot and slide the part towards the button
Fix your button hole foot with the
•
button. Put the cloth under the foot.
Put the stitch dial on 1.
•
Put the stitch length on the marker of button hole symbol.
•
Choose stitch width between 3 and 6.
•
Pull the lever with the button hole symbol (left of button hole foot)
•
down and then towards you. This lever enables automatic sewing.
Start sewing your button hole. The machine will sew a latch and the size
•
of button hole is according the button.
For another button hole pull the lever to the front.
•
When the button holes are completed, push the lever up.
•
With the knife you can cut the button holes in the middle.
•
Tip: a pin at the end of the button hole will prevent deep cutting.
Pull slide to button
- 29 -
Push button hole lever down and
to front