Creating Groups - Honeywell 301C User Manual

Creating Groups

•
Use the arrows to move the cursor to a group line and press Enter
•
The field can be edited when the brackets stop blinking and the
word "end" blinks
•
Use the up or down arrows to scroll through the list of all units
connected to the 301C, until the desired address is displayed .
•
Press Enter again to validate the address.
•
The address is added to the group and the <end> bracket is
shifted one position to the right.
The process can be repeated until all the desired transmitters in the
group (up to 126) have been added. The address for each transmitter
added in the Tx Info menu is available when creating groups.
Note: Groups created in the Groups menu will appear in the product
type list (Tx Info - Ident screen) as "Group xx" (the number
assigned to the group when it was created).
35