Honeywell 301C User Manual page 70

The first of these screens allows the identification and address to be
configured:
BACnet ID:
Static IP address: This is an address that is used when DHCP is
Changing BACNet values
•
Use the keypad arrows to scroll down to select the desired line and
press Enter to select it.
•
Selecting BACnet ID activates the field. The ID value (0-4194303)
can be increased or decreased using the up or down keypad
arrows
If the Static IP address option is selected, the following screen
appears. All controllers are shipped with a preset IP address as shown
in the example below.
(Building Automation and Control Networks) is the
device ID number assigned to this particular
controller on a network.
disabled.
70