Editing Ppp Options - NETGEAR RM356 - Router - EN Reference Manual

Reference Guide for the Model RM356 Modem Router

Editing PPP Options

To edit PPP options:
Select Yes in the Edit PPP Options field of Submenu 11.1 - Remote Node Profile.
1.
Press [Enter] to display Menu 11.2 Remote Node PPP Options.
2.
Edit the options described in Table 5-2.
3.
Press [Enter] at the Press ENTER to Confirm... prompt to confirm your selections, and
4.
return to the previous menu.
Press [Esc] at any time to cancel your selections.
Continue to the end of Menu 11.1, and press [Enter] to save the selections you made in
5.
Menu 11.2.
Table 5-2 lists and describes each field in Menu 11.2 - Remote Node PPP Options.
Table 5-2. Fields in Menu 11.2 - Remote Node PPP Options
Field
Encapsulation
Compression
5-4
Description
Select CCP (Compression Control Protocol) for the PPP or MP link. Two options
are available in this field:
• Standard PPP—Standard PPP options are used (default).
• CISCO PPP—Cisco Systems PPP options are used.
Allows the negotiation of data compression with the remote node router.
Remote Node Configuration