Advertisement
3.
Inside the front grille, cut off the two pins, and
remove the push nuts.
FRONT GRILLE
FRONT GRILLE
4.
Using a shop towel around a screwdriver, gently
pry on the front "H" emblem to remove it. Remove
and discard the emblem and the push nuts.
5.
Using contact cleaner on a shop towel, clean the
area where the emblem was removed.
PUSH
NUTS
FRONT
GRILLE
FRONT "H" EMBLEM
6.
Remove the adhesive backing from the new "H"
emblem, and attach it to the front grille. Slide the
two new push nuts onto the pins.
7.
Reinstall all removed parts.
2 of 3
Installing the Rear "H" and "ODYSSEY" Emblems
8.
PINS
(Cut off.)
PUSH NUTS
(Discard.)
FLAT-TIP
SCREWDRIVER
SHOP TOWEL
ADHESIVE
BACKING
AII 20680 (9908)
To prevent damage to the body finish, attach
masking tape around the original rear "H" and
"ODYSSEY" emblems.
REAR "H" EMBLEM
MASKING TAPE
"ODYSSEY"
EMBLEM
© 1999 American Honda Motor Co., Inc - All Rights Reserved.
MASKING TAPE
Advertisement
