Advertisement
Equipment Checklist
Carefully unpack your
Mini Power
Presenter, and keep the packing materials for future reference.
Check to make sure that the following items are included:
• Honeywell
Mini Power
Presenter (with USB receiver)
• CR2032 lithium cell battery
• User Manual
System Requirements
It is recommended to install this wireless presenter under one of the following Operating Systems
• Windows 2000, XP , Windows Vista
TM
; presentation software: PowerPoint 2000 or later
•
Mac OS X (10. ) or later
3
; presentation software: PowerPoint v. X for Mac OS X or later
Product Features
Parts Description
LASER
BEAM
LASER
INDICATOR
NEXT
SLIDE
PREVIOUS
SLIDE
LASER
FRONT VIEW
BOTTOM VIEW
Removing and Storing the Receiver
Note: Improper removal and insertion may damage the receiver, please follow the diagram below.
Note:
2
1
1
1
1
USB
RECEIVER
BATTERY
CASE
REAR VIEW
KEY CHAIN
HOLE
Figure 1
1
2
Figure 2
2
Getting Started
Initial setup for the
Mini Power
Presenter
Step 1: Battery Storage -
Open the battery cover and insert the battery CR2032
with (+) side up into the battery compartment in back
of Presenter.
Step 2: Linking the Receiver -
Remove the receiver and plug it into an available USB
port on your computer. (Refer to Figure 2) , the Presenter
is ready to use.
Using the Link Option
Step 1. Press the link key on the receiver (connected to your computer now), and the LED light on the
receiver will come on. (Refer to Figure 1)
Step 2. Press "
" button and "
" button on the Presenter simultaneously for more than three seconds.
The LED on the receiver will start flashing to confirm the link is complete. The Mini Power Presenter
is now ready for use.
Note: Whenever you change new battery, it is recommended that you repeat the Link process again.
1
Using the
Mini Power
Presenter
Buttons
Functions
Laser
Press to emit the laser beam.
Next
Click to advance to the next slide.
1.Click to return to the previous slide.
1.Previous
2.Press and hold the key for over three seconds the
2.Dark Screen
PowerPoint screen will change to black.
Link the ID with the receiver.
+
ID Link
Note:
interference causes the remote control malfunction.
Care and Maintenance
• For cleaning, you are advised to use a soft, slightly moistened cloth.
• Avoid using solvents or abrasive substances.
•
Do not open the presenter for any maintenance.
2
How to operate
Implement ID change ONLY when serious RF
3
Advertisement
