Setting Up The Audio Options - Samsung DVD-R119 Instruction Manual

Setting up the Audio
Options
You can connect the DVD RECORDER to an external
amp or Home Theatre.
Allow you to setup the Audio device and sound status
depending on the audio system in use.
1 With the unit in Stop mode/No Disc mode,
press the MENU button.
No Disc
Programme Timer Record
Setup
MOVE SELECT
Press the ...† buttons to select Setup, then press
2
the OK or √ button.
No Disc
Programme System
Clock Set
Setup
Language
Audio
Video
Parental Control
Install
MOVE SELECT
Press the ...† buttons to select Audio, then
3
press the OK or √ button.
Audio setup menu will be displayed.
No Disc
Digital Output
Programme
DTS
Setup
Dynamic Compression : On
MOVE SELECT
Programme
√ √
RETURN EXIT
Setup
√ √
√ √
√ √
√ √
√ √
√ √
√ √
RETURN EXIT
Setup
√ √
: PCM
√ √
: Off
√ √
RETURN EXIT
Press the ...† buttons to select the desired audio
4
option, then press the OK or √ button.
No Disc
Programme Digital Output
DTS
Setup
Dynamic Compression : On
MOVE SELECT
Press the ...† buttons to select the desired item,
5
then press the OK button.
Press the RETURN or œ button to return
to the previous menu.
NOTE
Press the MENU button to exit the menu.
Digital Output
• PCM : Select this when you have no equipment
that can decode Dolby Digital (or MPEG-
2) signal. When you play Dolby Digital (or
MPEG-2) sound track, the digital output
are converted to PCM Stereo.
• Bitstream : Output Dolby Digital (or MPEG-2)
audio as bitstream. Select this
when your AV receiver or AV
amplifier have Dolby Digital (or
MPEG-2) Decoder.
Digital output setting is equally applied to
both Dolby Digital and MPEG-2 audio.
NOTE
LPCM sound track is always outputted as
PCM. It has no relation with Digital
Output setting.
Be sure to select the correct Digital
Output or you will hear no sound or loud
noise.
Setup
PCM
√ √
: PCM
√ √
Bitstream : Off
√ √
RETURN EXIT
English - 33