Setting Up The Progressive Scan - Samsung DVD-R119 Instruction Manual

Press the ...† buttons to select Video Output,
4
then press the OK or √ button.
No Disc
Programme TV Aspect
Noise Reduction
Setup
Video Output
MOVE SELECT
Press the ...† buttons to select the desired item,
5
then press the OK button.
In Component mode, you can set video output to
Progressive(P.SCAN) or Interlace, see page 36~37.
Available video output jacks are as follow.
Available Video Output Jack
Setting mode
Output jack P.SCAN off mode (Interlace mode) P.SCAN on mode
Component Output
(Y, Pb, Pr)
R, G, B
AV1 Scart
Composite
AV2 Scart Composite
Composite Video out
S-Video out
36 - English
Setup
: 4:3 Letter Box√ √
√ √
: Off
: Component √ √
Component
RGB
RETURN EXIT
Component mode
RGB Mode
O
O X
(TV i n progressi v e mode)
X
X O
O
O
O
O
O
O
O O
O
O
X
O
Setting up the
Progressive scan
If the TV supports Progressive Scan, press the P.SCAN
button on the front of the DVD RECORDER to enjoy.
If you select "Progressive scan mode", the component
cable has to be connected at first. (see page 19)
1 With the unit in Stop mode, press the P.SCAN button
on the front of the DVD RECORDER.
The message "Press [Yes] to confirm Progressive
scan mode. Otherwise, press [No]." will appear.
Press the œ √ buttons to select Yes, and then
press the OK button.
Press [Yes] to confirm Progressive scan mode.
Otherwise, press [No].
Yes
2 The message "Please, set your TV to Progressive
input. To deactivate, press [STOP] key." will
appear. Press the OK button.
Please, set your TV to Progressive input.
To deactivate, press [STOP] key.
OK
No