Powersaver - Samsung SyncMaster 800TFT Owner's Instructions Manual

PowerSaver

This FPD has a built-in power management system called PowerSaver. This system saves
energy by switching your FPD into a low-power mode when it has not been used for a certain
amount of time. The available modes are "On", "Standby", "Sleep Mode", and "Deep Sleep
Mode"
Table 2. Power-saving modes
State
Horizontal Sync Active
Vertical Sync Active
Video Active
Power Green
Indicator
Power 60W (Max.)
Consumption 56W (Nom.)
NOTE: This FPD automatically returns to normal operation when horizontal and vertical sync
return. This occurs when you move the computer's mouse or press a key on the key-
board.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
NOTE: Screen saver video patterns designed for use with CRT-based monitors are not recom-
mended for use with your FPD since they may not extinguish the FPD's back light
resulting in premature aging.
Adjusting Your FPD
Power-Saving Function mode (EPA/NUTEK)
Normal
Operation
Standby Mode
Inactive
Active
Blanked
Amber
Less than 5W Less than 5W
Sleep Mode Deep Sleep Mode
Position A1 Position A2
Active Inactive
Inactive Inactive
Blanked Blanked
Green/Amber Amber
Blinking Blinking
(0.5 sec (1 sec interval)
interval)
Less than 5W
15