Automatic Save; Direct-Access Features - Samsung SyncMaster 800TFT Owner's Instructions Manual

Automatic Save

Whenever you open the on-screen menu and allow an adjustment window to remain
on-screen for about three seconds without pressing another button, this FPD automatically
saves any adjustments you have made. These changes are saved into a user area in the FPD.
User areas are reserved according to the signal frequency from your computer. This FPD can
save adjustments for up to five user modes. It has ten factory preset or preload modes, one
for each signal frequency as listed in the "Preset timing modes" on page 20.
If you have made no adjustments, the on-screen menu disappears and the FPD does not save
anything.

Direct-Access Features

The features described on this page and the next page can be accessed quickly, at the touch
of one button.
Once you finish making adjustments to a feature, push the EXIT button to turn off the menu
or allow the OSM to time-out and disappear automatically.
Auto Adjustment
Auto Adjustment
No Yes
Ð +
EXIT: Exit key
Brightness
Brightness
+
Ð
EXIT: Exit key
Adjusting Your FPD
Follow these instructions to enable or disable the
automatic screen adjustments for your FPD.
1
With the menu off, push the EXIT button.
The automatic adjustment display will appear.
2
Follow the directions previously given on
page 6.
Caution : For Auto Adjustment to function correctly,
the monitor must display a full screen, colored
image.
Follow these instructions to adjust the brightness of
the FPD's display.
44
1
With the menu off, push the "
"
will appear.
2
Push the "
brightness; push the "
decrease the brightness.
+
( )
" button. The brightness display
+
( )
" button to increase the
–
( )
" or
Ð
( )
" button to
9