Device/Label Memory Area Setting; Default Capacity - Mitsubishi Electric MELSEC iQ-R-R00CPU User Manual

33.6

Device/Label Memory Area Setting

The capacity of each area on the device/label memory can be specified.

Default capacity

The default capacity of each area is as follows.
Item
Standard device area
Safety device area
Safety label area
Safety local device area
Standard/safety shared label area
Standard label area
Standard latch label area
Standard local device area
File storage area
The standard local device area capacity obtained by subtracting the total capacity of the standard device area,
standard label area, standard latch label area, file storage area, and safety device/safety label area capacity,
and the total standard/safety shared label area from the total device/label memory is set. Note, however, that
even if the total capacity of the standard device area, standard label area, and safety device/safety label area
capacity is smaller than the following, the remaining capacity cannot be assigned to the standard local device
area. (The remaining area will be an unused area.)
• R08SFCPU: 50K words
• R16SFCPU: 60K words
• R32SFCPU: 70K words
• R120SFCPU: 90K words
The safety local device area capacity obtained by subtracting the total capacity of the safety device area and
safety label area from the safety device/label memory capacity is set.
33 FUNCTIONS
544
33.6 Device/Label Memory Area Setting
R08SFCPU R16SFCPU
40K words 40K words
20K words 20K words
20K words 20K words
0K words 0K words
10K words 10K words
40K words 50K words
2K words 2K words
0K words 0K words
457K words 713K words
R32SFCPU R120SFCPU
40K words 40K words
20K words 20K words
20K words 20K words
0K words 0K words
10K words 10K words
90K words 110K words
4K words 4K words
0K words 0K words
969K words 1481K words