Configuring Your Printer From The Printer Home Page - Honeywell PX4i User Manual

Use the following illustrations to understand the Setup menu. The main menus of
the setup tree are organized in a loop. Each main menu branches out to a number
of sub-menus. If you have optional accessories installed in your printer, the firm-
ware adds the necessary setup parameters to the Setup tree.
The Main Menus in Setup Mode for Fingerprint
E T U P :
F E E D A D J
R F I D
Option
The Main Levels of the Setup Menu in IPL
E T U P :
C O N F I G U R A T I O N
For more information on the IPL and Fingerprint menu systems, "Setup Menus" on
page 133.

Configuring Your Printer From the Printer Home Page

If you are using an Ethernet or 802.11 wireless connection, you can change config-
uration settings from your printer's home page.
Note: You should have already connected your printer to your network and obtained an IP
address.
64
T
E T U P :
E R - C O M , U A R T 1
E T U P :
P R I N T D E F
E T U P :
M E D I A
E T U P :
E T U P :
N E T W O R K
T
Starting point
E T U P :
E R - C O M
E T U P :
M E D I A
Starting point
E T U P :
E R - C O M , U A R T 2
>R
L
E T U P :
C O M
C O M
R
L
E T U P :
T E T / E R V I C E
PX4i and PX6i High Performance Printer User Guide
Option
E T U P :
E R - C O M , U A R T 3
Option
E T U P :
E R - C O M , U A R T 4
Option
E T U P :
E R - C O M , U A R T 5
Option
E T U P :
N E T - C O M , N E T 1
E T U P :
E T U P :
N E T W O R K
E T U P :
R F I D
Option