Breville BMO120 Instruction Book page 20

Hot Drinks Auto Menu
1. Use heat-proof microwave-safe cups to
reheat drinks. For even heating, always
space cups evenly around the outside of
the turntable.
1. Press the HOT DRINKS button repeatedly
until the number of cups to be heated
appears on the LED Screen, 1, 2, 3
(representing cups) will be displayed in that
order. One cup is approximately 120ml. For
example, press the HOT DRINKS button
once, 1 will be displayed.
1. Press the START/+30 SEC button to
commence operation, the beeper will sound
once. When cooking is finished, the beeper
will sound five times and the LED Screen
will revert back to standby.
NOTE
If warming more than 1 cup at a time, arrange
cups evenly spaced around the outside of the
turntable.
Dinner Plate Auto Menu
1. Press the DINNER PLATE button
repeatedly until the approximate weight of
the food to be re-heated appears on the LED
Screen, 250, 350, 500 grams will display in
that order. For example, press the DINNER
PLATE button once , 250 will be displayed.
2. Cover plate with vented cling wrap,
absorbent paper or a microwave safe
vented lid.
3. Press the START/+30 SEC button to
commence cooking, the beeper will sound
once. When heating is finished, the beeper
will sound five times and the LED Screen
will revert back to standby.
20
AUTO MENUS
1. Press the PIZZA button repeatedly until
the approximate weight of the pizza to be
cooked appears on the LED Screen, 100,
200, 400 grams will be displayed in that
order. For example, press the PIZZA button
once, 100 will be displayed.
2. Line turntable with absorbent paper and
place pizza slices on top. This will absorbed
excess moisture and prevent base from
becoming soggy.
3. Press the START/+30 SEC button to
commence cooking, the beeper will sound
once. When cooking has finish, the beeper
will sound five times and then the LED
Screen will revert back to standby.
MEMORY FUNCTION
1. Press the 0/MEMORY button twice, stop
when the LED Screen displays 2.
2. Press the TIME COOK button once, then
press 3,2,0 in order to set the cooking time 3
minutes 20 seconds.
3. Press the POWER LEVEL button once.
PL10 will be displayed on the LED Screen,
then press the 8 button, PL8 will now be
displayed on the LED Screen.
4. Press the START/+30 SEC button to save
the setting as Memory Function setting
2. The beeper will sound once and will
display 2. The setting has now been saved
as Memory 2.
5. Up to 3 memories can be stored in the
Microwave Oven Memory Function. Repeat
the above steps to store desired settings in
each memory allocation.
NOTE
Once the main power is switched off, stored
memories will be deleted.