Miele KFNS 37432 iD Operating And Installation Instructions page 85

 Push the loose-fitting fixing bracket
against the side wall.
 Screw the fixing bracket  to the
housing unit side wall using the
screws . Pre-drill the hole in the
housing unit if necessary.
 Secure the fixing bracket  to the
housing unit side walls using the
screws . Drill holes in the housing
unit side walls if necessary.
Important: Push the protruding
bracket using your thumb towards
the housing unit wall whilst tightening
the screws. The appliance must not
pull back into the unit.
 Then tighten the screws  and .
Installing the appliance
 Break off the ends of the brackets
and dispose of them. They are no
longer needed.
 Attach the respective covers  and
 to the fixing brackets.
85