Climate Range; Ventilation - Miele KFNS 37432 iD Operating And Installation Instructions


In environments with high
humidity condensation can build up
on the exterior of the appliance.
This condensate can cause corrosion
of the appliance walls.
For prevention, it is advisable to
install the appliance with sufficient
ventilation in a dry and/or air
conditioned room.
After installation please ensure that
the appliance doors close properly,
the ventilation gaps are not covered
and that the appliance has been
installed in accordance with these
installation instructions.

Climate range

The appliance is designed for use within
a certain climate range (ambient
temperatures) and should not be used
outside this range. The climate range of
the appliance is stated on the data plate
inside the appliance.
Climate range
SN
N
ST
T
Operating in a room which is too cold
will result in the compressor switching
off for too long, causing the internal
temperature in the appliance to rise with
the risk of food deteriorating and going
off.
Ambient room
temperature
+10 to +32 °C
+16 to +32 °C
+16 to +38 °C
+16 to +43 °C
Installation advice

Ventilation


If the required ventilation gaps
are not adhered to the compressor
will switch on more often and will run
for longer.
This will result in increased energy
consumption and a higher operating
temperature for the compressor. This
may, in turn, cause damage to the
compressor.
It is essential to adhere to the
required ventilation gaps.
Air at the back of the appliance gets
warm. The appliance housing unit must
therefore be constructed to allow
sufficient space for ventilation (see
"Building-in dimensions").
– Air intake  occurs via the plinth at
the bottom of the appliance and the
air escapes at the top  at the rear
of the housing unit.
– A ventilation gap of at least 40 mm
depth must be allowed for behind the
appliance for air to circulate.
69