Operating The Appliance; Switching On - Miele KFNS 37432 iD Operating And Installation Instructions

Operating the appliance

A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Each touch of a sensor is confirmed
with a keypad tone. The keypad tone
can be switched off if you wish (see
"Further settings - Audible tones").

Switching on

When the appliance is connected to the
electrical supply, the mains connection
symbol  will appear in the display
after a short while.
 Touch the On/Off sensor.
The mains connection symbol  goes
out and the appliance starts to cool.
The sensors for cooling zones that can
be selected appear in the control panel:
The refrigerator section sensor is
highlighted yellow and the current
temperature in this section appears in
the display.
Switching on and off
When the refrigerator door is opened,
the interior lighting comes on and the
LED lighting on the adjustable shelves
becomes brighter until it reaches its
maximum brightness.
When the appliance is switched on for
the first time, the sensor for the freezer
section and the alarm symbol  will
flash until the set temperature is
reached.
As soon as the set temperature is
reached, the sensor for the freezer
section will light up constantly and the
alarm symbol  will got out.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it. Do
not place food in the freezer section
until the temperature is at least
-18 °C.
21