Identifying The Module Parts - Cisco 7010 Installation Manual

Firepower 7000 series; firepower 8000 series
Hide thumbs Also See for 7010:
Table of Contents

Advertisement

Appendix C
Inserting and Removing Firepower 8000 Series Modules
Note
Use this dual-slot NetMod only on the 40G-capacity Firepower 8250 or Firepower or AMP 8350. If you
need to upgrade your device, see the Cisco 8000 Series Device 40G Capacity Upgrade Guide.
Caution
The quad-port 10GBASE fiber non-bypass NetMod contains non-removable small form factor pluggable
(SFP) transceivers. Any attempt to remove the SFPs can damage the module.
If you install a NetMod in an incompatible slot on your Firepower device or a NetMod is otherwise
incompatible with your system, an error or warning message appears in the web interface on the
managing Management Center when you attempt to configure the NetMod. Contact support for
assistance.
Replacing a NetMod can alter the configuration of a fully configured Korean-certified (KCC mark)
Note
Firepower device. For more information, see the original configuration documentation for your
appliance and the Regulatory Compliance and Safety Information for FirePOWER and FireSIGHT
Appliances document.

Identifying the Module Parts

All modules contain the same parts, regardless of sensing interface, speed, or size of the module.
dual-port 10GBASE (MMSR or SMLR) fiber configurable bypass NetMod. For more information,
see
Dual-Port 10GBASE (MMSR or SMLR) Fiber Configurable Bypass NetMod, page
dual-port 40GBASE-SR4 fiber configurable bypass NetMod. For more information, see
40GBASE-SR4 Fiber Configurable Bypass NetMod, page
quad-port 1000BASE-T copper non-bypass NetMod. For more information, see
1000BASE-T Copper Non-Bypass NetMod, page
quad-port 1000BASE-SX fiber non-bypass NetMod.quad-port 1000BASE-SX fiber non-bypass
NetMod. For more information, see
page
7-38.
quad-port 10GBASE (MMSR or SMLR) fiber non-bypass NetMod. For more information, see
Quad-Port 10GBASE (MMSR or SMLR) Fiber Non-Bypass NetMod, page
stacking module. For more information, see
7-36.
7-38.
Quad-Port 1000BASE-SX Fiber Non-Bypass NetMod,
Stacking Module, page
Firepower 7000 and 8000 Series Installation Guide
Identifying the Module Parts
7-35.
Dual-Port
Quad-Port
7-39.
7-40.
C-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents