Cisco 7010 Installation Manual page 108

Firepower 7000 Series Devices
Firepower 70xx Family Front View
The front of the chassis contains the LCD panel, sensing interfaces, front panel, and management
interface.
Figure 7-1
The following table describes the features on the front of the appliance.
.
Table 7-1 Firepower 70xx Family System Components: Front View
Feature
LCD panel
Sensing interfaces
10/100/1000 Ethernet
management interface
Front panel
Figure 7-2
Table 7-2
A
B
C
Firepower 7000 and 8000 Series Installation Guide
7-2
Firepower 70xx Family (Chassis: CHRY-1U-AC; NEME-1U-AC) Front View
Description
Operates in multiple modes to configure the device, display error messages, and view system
status. For more information, see
Contain the sensing interfaces that connect to the network. For information, see
Interfaces, page 7-4.
Provides for an out-of-band management network connection. The management interface is
used for maintenance and configuration purposes only and is not intended to carry service
traffic.
Houses LEDs that display the system's operating state, as well as various controls, such as the
power button. For more information, see
Components, page 7-8.
Firepower 70xx Family Front Panel
Front Panel Components
Reset button
System status LED
Hard drive activity LED
Using the LCD Panel on a Firepower Device, page
Table 7-11Firepower 7110 and 7120 Front Panel
D System ID button
E Power button and LED
Chapter 7 Hardware Specifications
6-1.
Sensing