Functional Description - Makita DCL142 Instruction Manual

FUNCTIONAL
DESCRIPTION
CAUTION:
ing or checking function on the tool.
and battery as shown in diagram when loading
Installing or removing battery
cartridge
3
1. Red indicator 2. Button 3. Battery cartridge
CAUTION:
removing of the battery cartridge.
when installing or removing battery car-
tridge. Failure to hold the tool and the battery
hands and result in damage to the tool and
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper side of the button, it is not locked completely.
CAUTION:
red indicator cannot be seen. If not, it may acci-
or someone around you.
cartridge does not slide in easily, it is not being
-
inserted correctly.
Battery protection system
The cleaner is equipped with the protection system,
which automatically cuts off the output power for its long
service life.
The cleaner stops during operation when the cleaner
This is caused by the activation of protection system
and does not show the cleaner trouble.
At this time, release the switch trigger and
remove causes of overload and then pull the
switch trigger again to restart.
Recharge the battery cartridge.
Switch action
1
1
2
1. OFF button 2.
power lamp
button. To switch off, press the "OFF" button. To change
ond press for low speed and then each press on this
Lighting the lamp
For Model DCL182F only
CAUTION:
causes damage to your eyes.
4 ENGLISH
2
3
3. Battery
-