Entering The Venue Parameters - Bosch LA3-VARI-B Installation Manual

32 en | Configuring the VARI
6.3

Entering the venue parameters

Having connected the PC to the VARI, start the VariControl application. A pop-up appears to
select between off‑line operation or on-line operation. Select on‑line operation by deselecting
the off‑line mode and select the communication port to which the converter is connected. If a
CobraNet® module has been installed, the CobraNet® serial bridge can be selected as
communication port for configuration via Ethernet.
Figure 6.3: VariControl Communication options
VariControl auto-detects the VARI configuration to which it is connected, and the precise
appearance of the opening screen will reflect the particular model(s). By double‑clicking a
particular unit in the Network view, the individual settings of that unit are shown and can be
changed. Following an example is shown (in off‑line mode) for the VARI‑B.
Figure 6.4: Entering the venue parameters
2018.06 | V1.3 | Installation manual
VARI-directional array
Bosch Security Systems B.V.