Maintenance Page - Bosch B426 Installation And Operation Manual

24 en | Configuration
Selections: Sixty-four hexadecimal characters represented in up to 32 fields (2 hexadecimal
characters per field)
–
–
–
Web and Automation Security
Default: Enable for B9512G/B8512G, B6512/B5512/B4512/B3512, and GV4 v2.xx control
panels, Disable for all other control panels.
Selections: Disable, Enable
This parameter enables enhanced security for Automation and B426 Web Access.
When enabled, HTTPS is applied to B426 Web Access changing the default value of the HTTP
port number parameter. This setting also enables TLS Security for Automation.
5.3.8

Maintenance page

Figure 5.7: Maintenance page
Web Access Password
Default: B42V2
Selections: Four to ten case sensitive alphanumeric characters
Enter the password to log in to the configuration web pages. It is recommended to change the
default login password to secure of the module configuration.
2016.08 | 08 | F.01U.266.226
128 bit key length is 16 bytes (16 fields displaying 2 ASCII [0-9, A-F] characters).
192 bit key length is 24 bytes (24 fields displaying 2 ASCII [0-9, A-F] characters).
256 bit key length is 32 bytes. (32 fields displaying 2 ASCII [0-9, A-F] characters).
Installation and Operation Guide
Conettix Ethernet Communication Module
Bosch Security Systems, Inc.