Using The Grass Trimmer As An Edger - Makita UR100D Instruction Manual

NOTICE:
Do not force the trimmer in densely
growing grass.
NOTICE:
Do not use the trimmer as if you dig out
the ground.
Cutting the grass near tree, block,
brick, or stone
Hold and tilt the grass trimmer at a height where the
spool or blade does not touch the ground. Cut the grass
using the nylon cord tip or plastic blade like knocking
the ground.
NOTICE:
When cutting the grass, move the
grass trimmer around the tree or blocks so that
the nylon cord or blade does not touch the tree or
blocks. It is recommended to keep the tool more than
5 cm away from the tree or block. If the nylon cord or
blade touch the tree or block, the nylon cord may be
torn or the blade may wear out rapidly. If the nylon
cord is torn in the spool, set the nylon cord again
referring to the replacement procedure in this manual.

Using the grass trimmer as an edger

Using the grass trimmer as an edger is suitable for
cutting the grass growing along the bricks or blocks.
Pull down the wire guard and rotate the grass trimmer
180°.
with the ground, move the grass trimmer to cut the
parallel along the bricks or blocks.
1. Wire guard
13 ENGLISH
1