Cisco Catalyst 3560-X Command Reference Manual page 756

show mvr interface
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-724
Downloaded from www.Manualslib.com
In the preceding display, Status is defined as follows:
Active means the port is part of a VLAN.
•
• Up/Down means that the port is forwarding/nonforwarding.
Inactive means that the port is not yet part of any VLAN.
•
This is an example of output from the show mvr interface command for a specified port:
Switch# show mvr interface gigabitethernet1/0/2
Type: RECEIVER Status: ACTIVE Immediate Leave: DISABLED
This is an example of output from the show mvr interface interface-id members command:
Switch# show mvr interface gigabitethernet1/0/2 members
239.255.0.0 DYNAMIC ACTIVE
239.255.0.1 DYNAMIC ACTIVE
239.255.0.2 DYNAMIC ACTIVE
239.255.0.3 DYNAMIC ACTIVE
239.255.0.4 DYNAMIC ACTIVE
239.255.0.5 DYNAMIC ACTIVE
239.255.0.6 DYNAMIC ACTIVE
239.255.0.7 DYNAMIC ACTIVE
239.255.0.8 DYNAMIC ACTIVE
239.255.0.9 DYNAMIC ACTIVE
Command
mvr (global configuration)
mvr (interface configuration)
show mvr
show mvr members
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Description
Enables and configures multicast VLAN registration on the
switch.
Configures MVR ports.
Displays the global MVR configuration on the switch.
Displays all receiver ports that are members of an MVR
multicast group.
OL-21522-02