Cisco Catalyst 3560-X Command Reference Manual page 666

show ipc
Catalyst 3750-X and 3560-X Switch Command Reference
2-634
Downloaded from www.Manualslib.com
This example shows how to display the contents of the IPC retransmission queue:
Switch> show ipc queue
There are 0 IPC messages waiting for acknowledgement in the transmit queue.
There are 0 IPC messages waiting for a response.
There are 0 IPC messages waiting for additional fragments.
There are 0 IPC messages currently on the IPC inboundQ.
Messages currently in use
Message cache size
Maximum message cache usage
0 times message cache crossed
Emergency messages currently in use
There are 2 messages currently reserved for reply msg.
Inbound message queue depth 0
Zone inbound message queue depth 0
This example shows how to display all the IPC session statistics:
Switch# show ipc session all
Tx Sessions:
Port ID Type
10000.7 Unicast
port_index = 0 type = Unreliable
Msgs requested = 180
10000.8 Unicast
port_index = 0 type = Reliable
Msgs requested = 0
Rx Sessions:
Port ID Type
10000.7 Unicast
port_index = 0 seat_id = 0x10000
No of msgs requested = 180
10000.8 Unicast
port_index = 0 seat_id = 0x10000
No of msgs requested = 0
This example shows how to display the status of the local IPC server:
Switch> show ipc status cumulative
Time last IPC stat cleared :never
This processor is the IPC master server.
Do not drop output of IPC frames for test purposes.
1000 IPC Message Headers Cached.
Total Frames
0 0
Total from Local Ports
Total Protocol Control Frames
Total Frames Dropped
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
:
:
:
5000 [max]
:
Name
MDFS RP:Statistics
last sent = 0
Msgs returned = 180
Slot 1 :MDFS.control.RIL
last sent = 0
Msgs returned = 0
Name
MDFS RP:Statistics
last sent = 0
Msgs returned = 180
Slot 1 :MDFS.control.RIL
last sent = 0
Msgs returned = 0
IPC System Status
Service Usage
3
1000
1000
0
last heard = 0
last heard = 0
last heard = 0
last heard = 0
Rx Side Tx Side
12916 608
13080 574
116 17
0 0
OL-21522-02