Cisco Catalyst 3560-X Command Reference Manual page 497

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Related Commands
OL-21522-02
Downloaded from www.Manualslib.com
This example shows how to disable the egress expedite queue after the SRR shaped and shared weights
are configured. The shaped mode overrides the shared mode.
Switch(config)# interface gigabitethernet1/0/2
Switch(config-if)# srr-queue bandwidth shape 25 0 0 0
Switch(config-if)# srr-queue bandwidth share 30 20 25 25
Switch(config-if)# no priority-queue out
You can verify your settings by entering the show mls qos interface interface-id queueing or the show
running-config privileged EXEC command.
Command
show mls qos interface queueing
srr-queue bandwidth shape
srr-queue bandwidth share
manuals search engine
Description
Displays the queueing strategy (SRR, priority queueing), the
weights corresponding to the queues, and the
CoS-to-egress-queue map.
Assigns the shaped weights and enables bandwidth shaping on
the four egress queues mapped to a port.
Assigns the shared weights and enables bandwidth sharing on
the four egress queues mapped to a port.
Catalyst 3750-X and 3560-X Switch Command Reference
priority-queue
2-465