Led Status Board; Pc Card Assembly - NEC Versa LXi Series Service And Reference Manual

LED Status Board

Use the following steps to remove the LED status board from the system.
1. Remove the keyboard and front cover from the system.
2. Locate the LED status board and the securing tabs.
3. Slide the LED status board out from under the securing tabs and remove the board.

PC Card Assembly

Use the following procedure to remove the PC card assembly from the system.
Remove the keyboard and front cover from the system.
1.
Locate and remove the three screws securing the PC card assembly.
2.
Lift the PC card assembly up and away from the main board and disconnect it from
3.
connector P14. Remove the PC card assembly.
Locating the board and tabs
Removing the PC card assembly screws
Disassembly and Reassembly 3-13