Cisco ASR 9000 Series Configuring page 31

Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router
Command or Action
Step 4
framing sdh
Example:
RP/0/RSP0/CPU0:router(config-sonet)#
framing sdh
Step 5
au number
Example:
RP/0/RSP0/CPU0:router(config-sonet)# au 1
Step 6
mode t3
or
mode e3
Example:
RP/0/RSP0/CPU0:router(config-auPath)#
mode t3
Step 7
root
Example:
RP/0/RSP0/CPU0:router(config-auPath)#
root
Step 8
controller {t3 | e3} interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# controller
T3 0/1/1/0/0
Step 9
mode serial
Example:
RP/0/RSP0/CPU0:router(config-t3)# mode
serial
Step 10
show configuration
Example:
RP/0/RSP0/CPU0:router(config-t3)# show
configuration
Step 11
root
Example:
RP/0/RSP0/CPU0:router(config-t3)# root
OL-26061-03
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
Purpose
Configures the controller framing for Synchronous Digital
Hierarchy (SDH) framing.
SONET framing (sonet) is the default.
Specifies the administrative unit (AU) group and enters AU path
configuration mode. For AU-3, the valid range is:
1 to 48—1-Port Channelized OC-48/DS3 SPA
•
• 1 to 3—1-Port Channelized OC-3/STM-1 SPA
• 1 to 12—2-Port Channelized OC-12c/DS0 SPA
Note The au command does not specify the AU type. It specifies
the number of the AU group for the AU type that you want
to configure. The range for the AU command varies based
on whether you are configuring AU-3 or AU-4.
Sets the mode of interface at the AU level to T3 or E3.
Exits to global configuration mode.
Enters T3 or E3 controller configuration submode and specifies the
T3 or E3 controller name and interface-path-id with the
rack/slot/module/port/auNum notation.
Configures the mode of the port to be clear channel serial.
Displays the contents of uncommitted configuration.
Exits to global configuration mode.
How to Configure Channelized SONET/SDH
HC-347