Cisco ASR 9000 Series Configuring page 26

How to Configure Channelized SONET/SDH
Restrictions
Channelized SDH AU-3 with c11-t1 or c12-e1 mapping is supported on the following SPAs:
•
•
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
controller sonet interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# controller
sonet 0/1/1/0
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
HC-342
Cisco 1-Port Channelized OC-3/STM-1 SPA
Cisco 2-Port Channelized OC-12c/DS0 SPA
configure
controller sonet interface-path-id
clock source {internal | line}
framing sdh
au number
mode mode
root
controller t1 interface-path-id
channel-group number
timeslots num1:num2:num3:num4
or
timeslots range1-range2
show configuration
root
interface serial interface-path-id
encapsulation {frame-relay | hdlc | ppp}
ipv4 ip-address mask
no shutdown
end
or
commit
show controllers sonet interface-path-id
Configuring Channelized SONET/SDH on the Cisco ASR 9000 Series Router
Purpose
Enters global configuration mode.
Enters SONET controller configuration submode and specifies the
SONET controller name and interface-path-id identifier with the
rack/slot/module/port notation.
OL-26061-03