Functional Description - Makita M6600 Instruction Manual

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function
on the tool.
Switch action
CAUTION:
Before plugging in the tool, always check to see
•
that the switch trigger actuates properly and
returns to the "OFF" position when released.
Switch can be locked in "ON" position for ease of
•
operator comfort during extended use. Apply
caution when locking tool in "ON" position and
maintain firm grasp on tool.
2
015022
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger, push in
the lock button and then release the switch trigger.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before carrying out any work on the
tool.
Installing shaft
1
3
2
015023
Tighten the shaft into the shaft holder till the hex nut
contacts with the shaft holder.
1. Lock button
2. Switch trigger
1
1. Hex nut
2. Shaft
3. Shaft holder
1
2
3
015024
Hold the shaft holder with the wrench and tighten the
hex nut with the other wrench in the direction of arrow.
Installing mixing blades (country specific)
007094
To mount the mixing blade, install it with the " UP " mark
on it facing the tool (directing inside).
007095
Install the mixing blade on the top of shaft and secure it
with hex. bolt.
Installing top grip (auxiliary handle)
015027
Screw the top grip on the tool securely.
5
1. Wrench
2. Shaft holder
3. Wrench
1. Mixing blade
1
2. Shaft
3. Hex bolt
2
3