Table of Contents
Advertisement
LAN and WAN IP Addresses
Fig ure 30
The LAN parameters of the PLA are preset in the factory with the following values:
• IP address of 192.168.1.2 with subnet mask of 255.255.255.0 (24 bits)
8.3.1 L AN T C P/ IP
The PLA has built-in DHCP server capability that assigns IP addresses and DNS servers to systems that
support DHCP client capability.
8.3.2 IP Alia s
IP alias allows you to partition a physical network into different logical networks over the same Ethernet
interface. The PLA supports three logical LAN interfaces via its single physical Ethernet interface with the
PLA itself as the gateway for each LAN network.
8.4 L AN IP Sc re e n
Use this screen to change the IP address for your PLA. Click
Network > LAN > IP (Access Point or Universal Repeater)
Fig ure 31
Chapter 8 LAN
Ne two rk > L AN > IP
PLA5236 User's Guide
49
.
Advertisement
Table of Contents
