Advertisement
Activate Your Internet Service
¾ To activate your Internet service:
1. Visit your cable Internet provider's website and follow the onscreen
instructions to activate your Internet service.
Cable Internet Provider Contact Information
Cablevision
http://www.cablevision.com
https://install.optimum.com/JointInstall/
Telephone number depends on your region.
Comcast XFINITY
http://www.comcast.com/activate
http://www.xfinity.com/internetsetup
http://www.xfinity.com/internetsupport
1-800-XFINITY (1-800-934-6489)
Mediacom
https://maestro.mediacomcc.com/walledgarden/page/
login.jsp
1-844-2SIMPLE (1-844-274-6753)
Time Warner Cable
https://elb02.activatemymodem.com/authentication
1-800-892-2253
Note:
Your cable Internet provider's contact information might change.
You can also find the contact information in your monthly
Internet service billing statement.
2. If you are unable to activate your Internet service using the instructions
on your cable Internet provider's website, call your cable Internet
provider and do the following:
a. When asked, provide your account information and provide the
cable modem's model number, which is CM600, serial number, and
MAC address.
The serial number and MAC address are on the product label, which
is on the back of the cable modem.
August 2015
b. Wait for your cable Internet provider to confirm that your
cable modem is active.
c. If you do not get an Internet connection with the cable modem, ask
your cable Internet provider to look for your cable modem online,
and do one of the following depending on what your cable Internet
provider tells you about your cable modem:
• If the cable modem is not visible, your cable Internet provider
can give you instructions to verify why the cable modem does
not connect with your high-speed Internet service.
• If the cable modem is visible to your cable Internet provider,
reboot the cable modem. Check your online status again.
Connect a Router
After you install the cable modem and activate your Internet service, you
can disconnect the computer and connect a router to the cable modem.
¾ To connect a router to the cable modem:
1. Reboot the cable modem by unplugging the power cable from the
cable modem and plugging it back in.
Wait for the Internet LED
2. Use an Ethernet cable to connect the Ethernet port on the
cable modem to the WAN or Internet port on the router.
3. Power on the router.
4. Wait until the router
is ready.
5. Connect a computer
to the router.
For more information
on how to set up your
router, see the
documentation that
came with your router.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
to stop blinking and light solid green.
Computer
Cable modem
Router
Support
Thank you for purchasing this NETGEAR product. After installing your device,
locate the serial number on the label of your product and use it to register your
product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone
support. NETGEAR recommends registering your product through the NETGEAR
website.
If you are experiencing trouble installing your cable modem, contact NETGEAR
at 1-866-874-8924. If you are experiencing trouble connecting your router,
contact the router manufacturer.
For product updates and web support, visit http://support.netgear.com.
NETGEAR recommends that you use only the official NETGEAR support
resources.
You can get the user manual online at http://downloadcenter.netgear.com.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
Customer-owned cable modems might not be compatible with certain
cable networks. Check with your cable Internet provider to confirm that this
NETGEAR cable modem is allowed on your cable network.
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference purposes only.
Advertisement
