NEC QX-S6648XP-6Q Installation Manual page 124

Installation Guide
QX-S6600 Series Ethernet Switches
Caution:
Minimum bend radius of 10G SFP+ Copper cable is 35mm. When not securing minimum
bend radius of a cable, there is damage of a cable or a possibility that performance
deterioration forms. Don't bend a cable below the minimum bend radius.
(1) QSFP+ connector
(3) SFP+ side pull latch
Figure 10-2 Minimum bend radius of 10G SFP+ Copper cable
Figure 10-3 40G QSFP+/10G*4 SFP+ Copper cable
1 2
(2) QSFP+ side pull latch
(4) SFP+ connector
10-7
10 Appendix C Ports and LEDs
3 4