Installation Guide
QX-S6600 Series Ethernet Switches
(3) LED for the management Ethernet RJ-45 port (LINK/ACT)
(4) LED for the management Ethernet SFP port (LINK/ACT)
(5) Fan tray slot 1
(7) Fan tray slot 3
(9) Power module slot 2
(11) Console port
(13) USB port
The QX-S6648XP-6Q switch comes with the power module slots empty and the filler
modules for the slots as accessories. You can install one or two power modules for the
switch as needed. In Figure 1-2, two PSR450-12A-N power modules are installed. For
more information about installing and removing the power module, see "Chapter 3
Installing/removing a power module."
The QX-S6648XP-6Q switch also comes with the fan tray slots empty. You must install
three fan trays for the QX-S6648XP-6Q for adequate heat dissipation, and their models
must be the same. In Figure 1-2, three LSPM5FANSA fan trays are installed. For more
information about installing and removing the fan tray, see " Chapter 3 Installing/removing a
fan tray".
(1) Primary grounding point
(6) Fan tray slot 2
(8) Power module slot 1
(10) Management Ethernet SFP port
(12) USB mini console port
QX-S6648XP-6Q side panel
(2) Auxiliary grounding point 1
1-2
1 Product overview