NETGEAR ProSafe FS108P Installation Manual

8 port 10/100 switch with 4 port poe

Hide thumbs Also See for ProSafe FS108P:

Enlarged version

Technical Support

PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH

YOUR PRODUCT.

By registering your product at www.NETGEAR.com/register, we can provide you with faster

ProSafe™ 8 Port 10/100 Switch with 4 Port PoE FS108P

expert technical support and timely notices of product and software upgrades.

NETGEAR, INC.

Support Information

Phone: 1-888-NETGEAR (For US & Canada only) - 24 x7 phone support

See Support Information card for other countries.

E-mail: support@NETGEAR.com (24 x 7 online support)

www.NETGEAR.com

and Everybody's Connecting are trademarks or registered trademarks of Netgear, Inc. in the

United States and/or other countries. Microsoft and Windows are registered trademarks of

Microsoft Corporation in the United States and/or other countries. Other brand and product

names are trademarks or registered trademarks of their respective holders. Information is

Installation Guide

October 2010

Page 1: Technical Support
E-mail: support@NETGEAR.com (24 x 7 online support) www.NETGEAR.com © 2010 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy, ProSafe, Auto Uplink and Everybody's Connecting are trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
Page 2: Other Devices
PoE Active On (Green) The PoE powered device (PD) is connected and ・ Make sure you are using the NETGEAR power adapter supplied with your switch. the port is supplying power successfully. No PoE powered device (PD) connected. The Link/Activity is not lit for a connected device or stays on continuously There's a hardware connection problem.