NETGEAR ProSafe FS108P Installation Manual
8-port switch with 4-port poe
Hide thumbs
Also See for ProSafe FS108P:
- Application notes (20 pages) ,
- Brochure & specs (2 pages) ,
- Installation manual (2 pages)
Advertisement
Quick Links
FS108P IG 11oct2.fm Page 1 Friday, October 12, 2012 3:29 PM
Installation Guide
ProSafe 8-Port Switch with 4-Port PoE FS108P
Step 1. Connect equipment
Computer
Server
FS108P
Optional router
Step 2. Connect power
Internet
Optional
modem
Step 3. Check status
Port LEDs
Power LED
PoE LEDs
On
PoE Active
Off
No PoE use (off)
PoE Fault LED
PoE fault
PoE Max. LED
Less than 7W of PoE
power is available
PoE MAX LED was active
in the previous 2 minutes (blinking)
PoE ports are working normally (off)
100 Mbps link
(left LED)
10 Mbps link
(right LED)
Activity (blinking)
No link (off)
Advertisement
Related Manuals for NETGEAR ProSafe FS108P
Summary of Contents for NETGEAR ProSafe FS108P
- Page 1 FS108P IG 11oct2.fm Page 1 Friday, October 12, 2012 3:29 PM Installation Guide ProSafe 8-Port Switch with 4-Port PoE FS108P Step 1. Connect equipment Step 2. Connect power Step 3. Check status Internet Computer Server Port LEDs Power LED PoE LEDs...
-
Page 2: Specifications
Other brand and product names are registered trademarks or trademarks of their NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit respective holders. © NETGEAR, Inc. All rights reserved.