Communication; Setup; Making A Call; Accepting An Incoming Call - Yamaha PSG-01S User Manual

By standing this unit, you can use this unit as a microphone speaker for Skype. This state is called "Active style".
y
For more information about Skype, visit the following website.
Skype website: http://www.skype.com/

Setup

To use this unit with Skype, you need to carry out the
following setup procedure. For further information, refer
to "Quick Start Guide" supplied with this unit.
1
Connect the PC/Mac to the Internet.
2
Connect this unit to the PC/Mac using
the supplied USB cable.
3
Install Skype.
4
Install the PSG-01S Controller and then
run the PSG-01S Controller.
5
On Skype, permit access from the PSG-
01S Controller.
appears in the task tray/menu bar. The setup is
complete.
Note
When appears in the task tray/menu bar, you cannot access
Skype from the PSG-01S Controller. To use this unit with Skype,
permit access from the PSG-01S Controller on Skype.

Communication

Making a call

1
Stand this unit on a flat surface.
y
This unit rings the Style-shift sound (chimes) when the
installation style is changed. If the Style-shift sound does
not ring or if the error sounds (buzzer sounds) are output,
reinstall this unit properly.
2
Specify a phone number to call.
3
Press
The phone call starts.
4
Start a conversation.
Adjust the speaker volume if necessary.
5
Press
The call ends.

Accepting an incoming call

1
While receiving an incoming call, stand
this unit on a flat surface and then press
(off-hook).
2
Start a conversation.
Adjust the speaker volume if necessary.
3
Press
The call ends.
(off-hook).
(on-hook).
(on-hook).
5