Updating The Firmware Using A Local File; Checking The Firmware Release Note - Yamaha PSG-01S User Manual

Updating the firmware using
a local file
If the PC/Mac connecting to the PSG-01S cannot be
connected to the Internet, follow the procedure below to
update the firmware manually using a local file.
Notes
• Once the firmware update is started, do not perform any other
operation until the update operation is completed. If the update
operation is interrupted, this unit may become unusable, in
which case you need to return this unit to the factory for repairs.
• Do not remove the USB cable during the firmware update.
Otherwise, this unit could become unusable, in which case you
need to return this unit to the factory for repairs.
1
In the PSG-01S Controller screen, click
the Maintenance tab.
2
Click "Confirm" of "Firmware update".
The license agreement screen appears.
3
Read the contents of license agreement
carefully, select "Accept all terms of the
license agreement", and then click "OK".
The firmware update screen appears.
4
Select "Specify a local file" and then
click "Start".
The file selection screen appears.
5
Select the firmware file and then click
"Open".
The firmware version confirmation screen appears.
6
Check the latest firmware version and
then click "OK" to start the firmware
update.
The firmware update starts.
Checking the firmware
release note
You can check the firmware release note by clicking
"Release note" in the firmware update screen.
13