Q2: Have A Communication Problem - Yamaha PSG-01S User Manual

Q2: Have a communication problem

Problem
The audio from the other unit
cannot be heard.
The audio from this unit cannot
be heard on the other unit.
The audio is interrupted.
The unit generates feedback
noises or echoes.
The unit generates noises.
The audio is cracking.
This unit does not work.
"INVALID" is displayed in the
Home tab of the PSG-01S
Controller.
Cause
The speakers are muted on this unit.
The microphone is muted on the other unit.
The speaker volume is set to the minimum on this
unit.
The microphone sensitivity is set to the minimum
on the other unit.
This unit is not selected in the Audio settings of
Skype.
The microphone is muted on this unit.
The speakers are muted on the other unit.
The microphone sensitivity is set to the minimum
on this unit.
The speaker volume is set to the minimum on the
other unit.
This unit is not selected in the Audio settings of
Skype.
The bandwidth of the USB is too narrow.
Another microphone is connected.
An object is placed near this unit.
This unit is placed near the wall.
This unit is used in a room with high
reverberation.
There is a problem with the equipment
configuration on another unit.
A device that interferes with this unit is placed
near this unit.
The speaker volume is too high.
This unit is not recognized by the PC/Mac.
This unit is installed incorrectly.
Remedy
Turn off the speaker mute function.
–
Turn the speaker volume up.
–
Select this unit.
Turn off the microphone mute function.
–
Increase the microphone sensitivity.
–
Select this unit.
Set "Bandwidth usage" to "Narrow band
(monaural)" in the PSG-01S Controller.
Select this unit in the Audio settings of Skype.
Avoid placing an object in front of the
microphones of this unit.
Move this unit away from the wall.
• Place objects with high sound absorbance in
the room other than in front of the
microphones.
• Avoid talking at a loud voice to reduce
reverberations.
–
Move this unit away from the device.
Turn the speaker volume down.
• (When using Windows)
If you see "?" or "!" in the device manager,
delete the device and then reconnect the USB
cable of this unit.
• (When using Mac)
Reconnect the USB cable of this unit.
Install this unit correctly. (page 5)
19