Cisco 890 Series Installation Manual page 27

Cisco 810 Series
Mean Time Between Failure Ground Benign Environment
Table A-2
calculated based on the Ground Benign condition. The values may be adjusted based on the different
router usage.
Cisco 819 Series
This section provides router, port, cabling specifications, and power adapters for the Cisco 812 ISRs and
contains the following topics:
•
•
•
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1040
For compliance and safety information, see the Regulatory Compliance and Safety Information
Note
Roadmap that was shipped with the router and
Cisco 800 Series Routers.
Router Specifications
Table A-1
specified is not supported. For the complete list of SKUs available for each Cisco 819 ISRs, see the
"SKU Information" section on page
Cisco Integrated Services Router Hardware Installation Guide
A-4
lists the Mean Time Between Failure (MTBF) values for Cisco 812 ISRs. The MTBF is
Table A-2
SKUs
C812G-CIFI-V-A-K9
C812G-CIFI-S-A-K9
C812G-CIFI+7-E-K9
C812G-CIFI+7-N-K9
C812G+7-K9
Router Specifications, page A-4
Mean Time Between Failure Ground Benign Environment, page A-8
Supported Power Adapters, page A-9
lists the operational limits of the Cisco 819 ISR. Operating the router outside of the limits
MTBF Values
MTBF (hours)
210,000
280,000
340,000
Regulatory Compliance and Safety Information for
1-14.
Appendix A Technical Specifications
OL-27407-02