Ap Rf Parameter Configuration (Radio) - Motorola PMP 320 Administration And Configuration Manual

PMP 320 Administration and Configuration Guide

AP RF Parameter Configuration (Radio)

Use the following procedure to configure the AP RF Parameter configuration air interface for
radio.
Procedure 4-2 Configure AP RF Parameter for Radio
1
2
3
4
MAR 2010
In most cases the AP RF parameter frequency should be set to 25 dBm. However, in
the United States, for operation in the 3.65 GHz band, the FCC limits the total EIRP
Chapter 9 : Regulatory, Legal, and Safety Notices
to 1W/MHz. Refer to
information on these limits.
Log in to the AP GUI menu. Refer to
Select Configuration > Air Interface > Radio from the Configuration menu
screen.
Configure the following:
x TX power
x Antenna gain
x Direction
x Antenna Height
Click Update to configure the AP.
AP RF Parameter Configuration (Radio)
Procedure 2-2 Logging in to the AP GUI
for more
.
4-3